Surface Preparation:

It is essential that surface should be sound, clean and dry surfaces in order that maximum bond strength between the substrate and the flooring system. All dust and debris should be removed prior to application of the product. All cracks, crevices and undulations shall be filled with epoxy based mortar.

Mixing:

Epoxy polyurethane coating is supplied in pre-weighed packs ready to use on site. Solvent or thinners should not beaded. A forced action mixer with a paddle fitted into a heavy duty, slow speed electric hand drill is recommended for mixing. Hardener component is mixed with Base resin in a suitable mixing vessel. The full cooler paste is then added and mixed until an even color is obtained. Finally the filler as supplied is added and mixed further for

Three minutes until homogenous lump free slurry is obtained. Epoxy polyurethane coating is supplied in pre-weighed packs ready to use on site. Solvent or thinners should not beaded. A forced action mixer with a paddle fitted into a heavy duty, slow speed electric hand drill is recommend for mixing. Hardener component is mixed with Base resin in a suitable mixing vessel. The full color paste is then added and mixed until an even color is obtained. Finally the filler as supplied is added and mixed further for three minutes until homogenous lump free slurry is obtained.

Laying:

The material is poured onto the primed substrate and spread to the required thickness with a steel trowel. Alternatively, a serrated trowel can be used. The resin floor should not be overworked but spread slowly and evenly. Immediately after spreading, the floor should be firmly rolled with a spiked roller to help release any entrapped air in the material and level any slight trowel marks. The floor should now self-smooth to an even colored dense, impervious floor.